There are numerous ways to ventilate a compressor room. From direct vent with ductwork attached to either the intake or exhaust side of the compressor, to general room ventilation using formulas based on air changes per hour.
Muza Sheet Metal Co will also assist in energy recovery of the heated air which means cost savings in heat bills over the winter.
Motor Output | Ventilation Amount (in case of air cooling) | Cooling Tower (in case of water cooling) | ||
---|---|---|---|---|
Heat Amount Generated (Mj/h) | Exhausted Air Amount(m3/min) | If t=5 (m3/min) | CT Exit Temperatire, if 32°C | |
7.5 kW | 32 | 20 | 85 | |
11kW | 47 | 30 | 125 | |
15kW | 68 [54] |
45 [85] (80)*3 |
180 [145] |
5t over |
22kW | 97 [79] |
55 [105] (80)*3 |
260 [210] |
10t over |
30kW | (121)*3 | (100)*3 | (340)*3 | |
37kW | 159 [130] |
85 [200] (120)*3 |
430 [400] |
10t over |
45kW | (184)*3 | (150)*3 | (510)*3 | |
55kW | 201 [ask us] |
140 [ask us] |
880 [ask us] |
15t over |
75kW | 272 [ask us] |
190 [ask us] |
1200 [ask us] |
20t over |
90kW | 30t over | |||
100kW | 30t over | |||
120kW | 30t over | |||
150kW | 30t over |
- The figures in [ ] are those of ZU and ZUV
- (Please ask us or the designated service factory about the details)
- *3: Applied to i-14000 IPM motor machine